| Product |
High-performance interior film with self-adhesive backing, suitable for various substrates and designed for ease of application on both flat and irregular surfaces. |
| Composition |
- Permanent & Yellow Adhesive (Flame Retardant)
- Permanent & Clear Adhesive (Non-Flame Retardant)
- Single Side PE coated release liner (Air-free)
- Non-PE coated release liner (Air-free, PW, BW, NW, NE)
|
| Application Temperature |
15~25°C |
| Compatible Substrates |
- Iron, painted board
- MDF
- Calcium silicate board
- Veneer
- Stainless Steel
- Aluminum
- Melamine - baked steel board
|
| Dimensions (Roll Sizes) |
- 122cm (48in) x 50M/R
- 122cm (48in) x 30M/R (PW/NS/SF)
- Thickness: 0.15~0.60mm (excluding release paper)
|
| Installation |
- Maintain ambient temperature at 15-25°C for 72 hours before and 48 hours after installation
- Use LX Hausys PM-04 primer for best adhesion
- Install using overlapping method to prevent shrinkage
- Maintain consistency in lot numbers
- Clean and sand adherend surface thoroughly
|
| Storage |
- 2 years shelf life from production date
- Store in cool, dry place away from high temperature, humidity, and direct sunlight
- Recommended storage: 20°C, 50% R.H.
|
| Performance |
- Tensile Strength: (L)150350 / (W)100350 kgf/cm² (ASTM 882)
- Elongation: (L)0400% / (W)0400% (ASTM 882)
- Adhesion (24hr): ≥ 1,000g/in (180° peeling, PSTC-1)
- Dimensional Stability: 0.8mm (100°C Oven, 2hr, adhered to aluminum plate)
|
| Primer |
LX Primer (Water Based) - PM-04 |
| Disclaimer |
- Product specifications may change without notice
- Variations in thickness may occur due to different embossing effects
- Strong scratching or rubbing of treated surfaces may damage the ink layer
|
